Now you can ‘mix & match’ retractors and manual belts from Q’STRAINT & SURE-LOK whenever you see the OMNI APPROVED Badge.
Designed for agencies that require total flexibility in a mixed-brand environment, the OMNI line takes the guess work out of securing your passengers.
All OMNI Floor Anchor Systems feature stainless steel or aluminum materials designed for demanding transportation environments.
It has always been recommended that tie-downs match with the brand of their floor anchorages. Now with the OMNI series you can reduce your liability and know that your products are tested and certified for both Q’Straint and Sure-Lok systems.
WARNING:
Using OMNI anchorages and track make it possible to use both Q’Straint and Sure-Lok tie-downs. Every RETRACTOR in a wheelchair position must be EITHER from Q’Straint or Sure-Lok — never mix brands on a four-point securement. OMNI anchorages are strictly tested and certified to be used with approved Q’Straint and Sure-Lok systems. Other non-approved systems should not be used with OMNI anchorages at any time.
For more information: Selecting Your System.
MEDIA
Downloads
Video
OMNI APPROVED ANCHORAGES
FE753NA100-04-3
Flange Series L-Track Pre-Drilled
- 100” (254cm) in length
- Standard 82 degree countersunk holes are pre-drilled every 4” (102mm)
- Accommodates 5/16” (8mm) bolts
- Download Product Spec Sheet
FE750NA100-04-3
Regular Series L-Track Pre-Drilled
- 100” (254cm) in length
- Standard 82 degree countersunk holes are pre-drilled every 4” (102mm)
- Accommodates 5/16” (8mm) bolts
- Download Product Spec Sheet
FE752NA100-04-3
Surface Angled Series L-Track Pre-Drilled
- 100” (254cm) in length
- Standard 82 degree countersunk holes are pre-drilled every 4” (102mm)
- Accommodates 5/16” (8mm) bolts
- Download Product Spec Sheet
FE201163
Flush Mount L-Pocket
Kit Includes:
- L-Track Floor Plate
- 7/16” (11mm) Bolt 3.5” (89mm) in length
- Washer and Hex Nut
Q5-7570-A
Recessed L-Pocket with Cover
Kit Includes:
- L-Track Floor Pocket with Cover
- (2) 5/16” (8mm) Bolts 1.5” (38mm) in length
- Washer and (2) Hex Nuts
Q5-7571-A
Oval L-Pocket
Kit Includes:
- L-Track Floor Pocket
- 3/8” (9.5mm) Bolt 2.5” (63.5mm) in length
- Washer and Hex Nut
Q8-7580-A
Slide ‘N Click Floor Anchor
Kit Includes:
- Bottom Assembly
- 3/8” (9.5mm) Bolt 2.5” (63.5mm) in length
- Washer, Hex Nut and Blue Plug
Q5-8525-SC
Slide ‘N Click Stowage Bracket
Bracket has passed the vibration and crash test and is designed to be mounted on the vehicle interior walls
Holds (4) Slide ‘N Click Retractors
Q5-8525-SC2
Slide ‘N Click Stowage Bracket
Bracket has passed the vibration and crash test and is designed to be mounted on the vehicle interior walls
Holds (2) Slide ‘N Click Retractors
OMNI ACCESSORIES
QC06059
End Cap for Surface Angled Series L-Track
With surface mount L-Track, protective end caps allow for a gradual rise at the ends of the track. The caps reduce the risk of tripping and are less of an obstacle for wheelchairs and other mobility devices.
QC06058
End Cap for Flange Series L-Track
These L-Track End Caps finish off your flush-mount flange series installation for a professional look. They feature a tapered edge to minimize snags and catches on the track edge.
FE201006
(8mm) Track Bolts
Bolts are 3” (76.2mm) long with automotive grade plating and a special sealant is applied under the bolt head to provide a seal between the track and the bolt.
Kit Includes:
- (100) bolts, washers and lock nuts
FE200744
Series L Track Seat Stud Fitting
For use in mounting vehicle seats into Series L Track.
FE200739
Series L Track Double Lug Stud Fitting
This fitting is used as a bolt-on anchoring point for Series L Track applications where higher strength than the FE200744 is required.
FE200751
25' PVC Track Filler Strip
For use with Series L-Track only. 25 feet per roll.