Occupant Restraints
Sure-Lok Occupant Restraint Systems provide a wide range of options, allowing you to select the products that are best suited for the needs of each user and the layout of each vehicle.
The 3 styles of Occupant Restraints:
Lap Belts, Shoulder Belts, or Integrated Combination Belts.
NEW! Read about recent improvements we’ve made to our Occupant Restraints.
Standards Compliance
Occupant Restraints, when properly used with a complete Sure-Lok System (comprised of wheelchair tie-down, a complete occupant restraint system, including lap and shoulder belt), track and anchorages are designed to meet the following requirements where applicable:
- 30mph/20g Impact Test Criteria per SAE J2249
- 30mph/20g Impact Test Criteria per Canadian Z605 Standard
- 30mph/20g Impact Test Criteria per National Standards for School Buses
- 49 CFR Part 38 Americans with Disabilities Act (ADA)
- 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection
- FMVSS 302 Flammability Test
- Certificates of Conformance available upon request
WARNING:
Occupant Restraints are not wheelchair securements. Always secure the occupant in the vehicle with a complete Sure-Lok Occupant Restraint System, consisting of lap and shoulder belts. Secure the wheelchair in the vehicle with a Sure-Lok Tie-Down System.
For more information: Selecting Your System.
MEDIA
Downloads
Downloads
PARALLEL LAP BELTS
The Parallel Lap Belt attaches directly to the floor track or plates and used with a shoulder belt provides a complete occupant restraint system that secures the passenger separately and independently from the wheelchair securement system. Each Premium Lap Belt contains three push-button buckles for greater versatility of attachment, two webbing adjusters for increased placement capability and web stiffeners for ease of installation. Each Standard Lap Belt contains a single push-button buckle and two webbing adjusters for increased placement capability.
INTEGRATED LAP BELTS
The Integrated Lap Belt attaches directly to the rear tie-down assemblies of the wheelchair securement system. Used with a shoulder belt, it provides a complete occupant restraint system that is an “integrated” part of the wheelchair securement. Each Integrated Lap Belt contains a single push-button buckle and webbing adjuster(s) for increased placement capability.
FE200842
Integrated Lap Belt
Length: 96"
Integrated Lap Belt with snap hooks to attach to D-rings on rear wheelchair tie-down assemblies.
FE200595
Integrated Lap Belt
Length: 80"
Integrated Lap Belt with snap hooks to attach to D-rings on rear wheelchair tie-down assemblies.
For use with FE500 Manual Series Systems only.
FE200637-14 / FE200637-020-14
Lap Belt Extension
FE200637-14 Length: 13"
FE200637-020-14 Length: 20"
AL700842
Integrated Lap Belt
Integrated Lap Belt with triangular fittings to attach to stud on rear wheelchair tie-down retractor assemblies. For use with Titan retractors only.SHOULDER BELTS
FE200599 / FE200732
Non-Retractable Shoulder Belt for Series L Track
FE200599 Length: 52"
FE200732 Length: 82"
Non-Retractable Shoulder Belt attaches to Series L Track on vehicle sidewall, providing increased positioning flexibility for multiple station vehicles.
FE200613 / FE200716
Non-Retractable Shoulder Belt for Series A Track
FE200613 Length: 52"
FE200716 Length: 82"
Non-Retractable Shoulder Belt attaches to Series A Track on vehicle sidewall, providing increased positioning flexibility for multiple station vehicles.
FE200599HA
Non-Retractable Shoulder Belt with Height Adjuster
Length: 72"
Non-Retractable Shoulder Belt attaches to Series L Track on vehicle sidewall and floor, providing increased positioning flexibility for multiple station vehicles. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
FE200710 / FE200710L
Non-Retractable Fixed Point Shoulder Belt
FE200710 Length: 52"
FE200710L Length: 82"
Non-Retractable Fixed-Point Shoulder Belt can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit.
FE200710HA
Non-Retractable Fixed-Point Shoulder Belt with Height Adjuster
Length: 72"
Non-Retractable Fixed-Point Shoulder Belt web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Bottom bracket can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
FE200865
Non-Retractable Fixed-Point Shoulder Belt with Quick Disconnect
Length: 63"
The Quick Disconnect Shoulder Belt can be mounted to the existing original equipment shoulder belt anchor bolt. This allows it to be used along with the original equipment shoulder belt. The Quick Disconnect Shoulder Belt can be easily removed, by using the single push-button buckle, allowing a passenger sitting on the flip seat to use the original equipment shoulder belt. When a wheelchair is placed in the same area, the Quick Disconnect Shoulder Belt connects to its short anchor strap by using the single push-button buckle.
FE200936
Retractable Fixed-Point Shoulder Belt
Length: 100"
Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment for proper shoulder belt placement on the occupant. Retractor can be mounted directly to the upper point of vehicle sidewall with mounting hardware included.
FE200604 / FE200604L
Retractable Fixed-Point Shoulder Belt
FE200604 Length: 112"
FE200604L Length: 136"
Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment. Web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit.
FE200604HA
Retractable Fixed-Point Shoulder Belt with Height Adjuster
Length: 136"
Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment. Web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
INTEGRATED COMBINATION BELTS
The Integrated Combination Belt provides a shoulder belt and Integrated Lap Belt that are incorporated into a fully retractable unit. It combines the automatic adjustability of a shoulder belt with the easy installation of an Integrated Lap Belt. The web guide can be mounted directly to vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to vehicle floor or sidewall, or can be converted from fixed-point to track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit.
AL700727 / AL700856
Integrated Combination Belt
Integrated Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The AL700856 is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.
For use with AL700 Titan Series Systems only
FE200727 / FE200856
Integrated Combination Belt
Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear wheelchair tie-down assemblies. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The FE200856 is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.
FE200727HA / FE200856HA
Integrated Combination Belt with Height Adjuster
Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear tie-down assemblies. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The FE200856HA is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.
AL700727HA / AL700856HA
Integrated Combination Belt with Height Adjuster
Integrated Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies. Height Adjuster provides nearly 12” of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The AL700856HA is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.
DUAL RETRACTABLE INTEGRATED COMBINATION BELTS
The Dual Retractable Integrated Combination Belt offers two retractors for easier webbing adjustment. The height of the belt can be adjusted for proper shoulder belt placement on the occupant simply by pushing a release button on the upper retractor. In addition to this feature, this belt can be moved front to back along the vehicle sidewall, without the use of tools, by simply removing the L fittings from the vehicle track.
FE200868-2 / FE200868-4
Dual Retractable Integrated Combination Belt
Dual Retractable Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor.
The FE200868-4 offers an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding.
AL700868-2 / AL700868-4
Dual Retractable Integrated Combination Belt
Triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor.
The AL700868-4 offers an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding.
OCCUPANT RESTRAINT ACCESSORIES
FE201037
Series L Track Mounting Kit for Occupant Restraint Retractors
This kit converts fixed-point retractable occupant restraint retractors to Series L Track application on vehicle floor. Used with FE200736 Series L Track Adjustable Sidewall Mounting Kit, retractable fixed-point occupant restraints can be moved along Series L Track without the use of tools.
FE200736
Series L Track Adjustable Sidewall Mounting Kit
This kit converts fixed-point occupant restraints to a Series L Track application on vehicle sidewall. Used with FE201037 or FE201039 Mounting Kit on the bottom retractor, retractable fixed-point occupant restraints can then be moved along vehicle tracks without the use of tools.
FE200747
Series L Track Mounting Kit
This kit allows semi-permanent mounting of fixed-point shoulder belts into Series L Track on the vehicle sidewall.