AL700 TITAN
Series Retractors
The Original TITAN.
For some transportation properties, the need to comply with the new WC18 standard may not be as immediate. The original TITAN has you covered. Boasting unique features not found on any other securement system, it’s proven performance still meets the demands of the road.
With its distinctive blue webbing and highly-visible, yellow “locked” indicator tag, the AL700 Titan Retractor Series simplifies the securement process for operators.
AL700 TITAN Features
AL700 TITAN Retractors
Standards Compliance
AL700 TITAN retractors, when properly used with a complete Sure-Lok System (comprised of wheelchair tie-down, a complete occupant restraint system, including lap and shoulder belt), track and anchorages are designed to meet the following requirements where applicable:
- 30mph/20g Impact Test Criteria per SAE J2249
- 30mph/20g Impact Test Criteria per Canadian Z605 Standard
- 30mph/20g Impact Test Criteria per National Standards for School Buses
- 49 CFR Part 38 Americans with Disabilities Act (ADA)
- 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection
- FMVSS 302 Flammability Test
- Certificates of Conformance available upon request
WARNING:
Always secure the occupant in the vehicle with a complete Sure-Lok Occupant Restraint System, consisting of lap and shoulder belts.
Secure the wheelchair in the vehicle with a Sure-Lok Tie-Down System.
For more information: Selecting Your System.
MEDIA
Downloads
Photos
KITS
AL700 TITAN Kits WITH Occupant Restraints
| FITTING | KIT PART No. | INCLUDED IN KIT | OCCUPANT RESTRAINT |
|---|---|---|---|
| L-TRACK | AL712S-4C | AL700855S (2) AL700907S (2) | AL700727HA |
| L-TRACK | AL712S-4C-7 | AL700855S (2) AL700907S (2) | AL700868-4 |
| SLIDE-N-CLICK | AL760S-4C-SNC | AL700944S-SNC (2) AL700945S-SNC (2) Q8-7580-A (4) | AL700727HA |
AL700 TITAN Kits WITHOUT Occupant Restraints
| FITTING | KIT PART No. | INCLUDED IN KIT |
|---|---|---|
| L-TRACK | AL727S-4C | AL700855S (2) AL700907S (2) |
| SLIDE-N-CLICK | AL761S-4C-SNC | AL700944S-SNC (2) AL700945S-SNC (2) Q8-7580-A (2) |
AL700 TITAN OCCUPANT RESTRAINTS
AL700727 / AL700856
Integrated Combination Belt
Integrated Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.
The AL700856 is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.
For use with AL700 Titan Series Systems only
FE200599 / FE200732
Non-Retractable Shoulder Belt for Series L Track
FE200599 Length: 52"
FE200732 Length: 82"
Non-Retractable Shoulder Belt attaches to Series L Track on vehicle sidewall, providing increased positioning flexibility for multiple station vehicles.
AL700842
Integrated Lap Belt
Integrated Lap Belt with triangular fittings to attach to stud on rear wheelchair tie-down retractor assemblies. For use with Titan retractors only.
AL700868-2 / AL700868-4
Dual Retractable Integrated Combination Belt
Triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor.
The AL700868-4 offers an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding.
AL700 TITAN ACCESSORIES
Q8-7580SL
Slide 'N Click Connector Assembly Kit
This kit converts AL700 Titan or FF600 Series wheelchair tie-down retractor assemblies to a Slide 'N Click fitting application.
AL701051
Series L Connector Assembly Kit
This kit converts AL700 Titan Series wheelchair tie-down retractor assemblies to a Series L Track application.