TITAN800 Retractor

titan800-logo

The Strongest TITAN Retractor Ever Made.

In addition to its familiar technology and distinctive blue webbing, the new TITAN800 was built with an innovative energy distribution design for maximum load capacity to meet the latest industry regulations.

wc18-slider-1

Meets the Requirements of WC18
and is compatible with WC19 Wheelchairs

TITAN800 Features

Built with an energy distribution design and stronger webbing to withstand the higher load requirements of the newest standards. Learn more about WC18.
J-Hook attachment improves your belt angles by minimizing twists.
Innovative fitting tells operators when the retractor is locked into place.
Allows operators to secure a wheelchair within seconds with just one hand.
Minimizes interference with wheelchairs to eliminate potential tripping hazards.

TITAN800 Retractors

Standards Compliance

TITAN800 retractors, when properly used with a complete Sure-Lok System (comprised of wheelchair tie-down, a complete occupant restraint system, including lap and shoulder belt), track and anchorages are designed to meet the following requirements where applicable:

  • Meets the requirements of WC18
  • 30mph/20g Impact Test Criteria per SAE J2249
  • 30mph/20g Impact Test Criteria per Canadian Z605 Standard
  • 30mph/20g Impact Test Criteria per National Standards for School Buses
  • 49 CFR Part 38 Americans with Disabilities Act (ADA)
  • 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection
  • FMVSS 302 Flammability Test
  • Certificates of Conformance available upon request

WARNING:

Always secure the occupant in the vehicle with a complete Sure-Lok Occupant Restraint System, consisting of lap and shoulder belts.
Secure the wheelchair in the vehicle with a Sure-Lok Tie-Down System.
For more information: Selecting Your System.

MEDIA

Downloads

Titan800 Product Brochure
Titan800 Install Manual
Titan800 Use & Care Manual
Titan800 Instruction Placard

Photos

Video

RESNA Overview

TITAN800 KITS

TITAN800 Kits WITH Occupant Restraints

FITTING KIT PART No. INCLUDED IN KIT OCCUPANT RESTRAINT
L-TRACK AL812S-4C AL800855S (4) AL700727HA
L-TRACK AL812S-4C-7 AL800855S (4) AL700868-4
SLIDE-N-CLICK AL860S-4C-SNC AL800944S-SNC (4) Q8-7580-A (4) AL700727HA

TITAN800 Kits WITHOUT Occupant Restraints

FITTING KIT PART No. INCLUDED IN KIT
L-TRACK AL827S-4C AL800855S (4)
SLIDE-N-CLICK AL861S-4C-SNC AL800944S-SNC (4) Q8-7580-A (4)

TITAN800 OCCUPANT RESTRAINTS

2015-07-21T17:43:02+00:00

AL700727HA / AL700856HA

Integrated Combination Belt with Height Adjuster

Integrated Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies. Height Adjuster provides nearly 12” of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

The AL700856HA is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.

Want to Learn More About the TITAN800?

We’re always here to help! Contact us today for questions about our products, training or support.

CONTACT CUSTOMER SERVICE