FF600 Retractor Series Systems

Home/Products/FF600 Retractors
FF600 Retractors 2017-05-10T13:23:47+00:00
AL700 TITAN Series Retractors

FF600
Series Retractors

A proven, convenient system to secure wheelchair passengers.

The ergonomically designed handle is quick and easy to grasp, the dual, 24-teeth sprocket mechanism enables the user to more easily increase tension on the webbing and the track fittings are specifically designed to ensure free pivoting action for optimum belt alignment. And the versatility of the system offers users a choice — S-hook or Buckle & Tab hardware attachment styles.

FF600 Features

D-ring configuration provides an easy attachment point for the snap hook on an integrated occupant restraint system.
S-hook attachment allows for easy, one-handed wheelchair securement.
The FF600 Series positive-locking retractor offers a choice for operators to tension the retractor to the desired load, locking the webbing at any length, including when fully retracted into the housing.
The ergonomically designed handle is quick and easy to grasp when applying tension to the retractor webbing. The chrome-plated metal cover provides a strong, durable finish.

FF600 Retractors

Standards Compliance

FF600 retractors, when properly used with a complete Sure-Lok System (comprised of wheelchair tie-down, a complete occupant restraint system, including lap and shoulder belt), track and anchorages are designed to meet the following requirements where applicable:

  • 30mph/20g Impact Test Criteria per SAE J2249
  • 30mph/20g Impact Test Criteria per Canadian Z605 Standard
  • 30mph/20g Impact Test Criteria per National Standards for School Buses
  • 49 CFR Part 38 Americans with Disabilities Act (ADA)
  • 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection
  • FMVSS 302 Flammability Test
  • Certificates of Conformance available upon request

WARNING:

Always secure the occupant in the vehicle with a complete Sure-Lok Occupant Restraint System, consisting of lap and shoulder belts.
Secure the wheelchair in the vehicle with a Sure-Lok Tie-Down System.
For more information: Selecting Your System.

MEDIA

Downloads

FF600 Catalog Section
FF600 Operation Decal
FF600 Maintenance Decal

Photos

KITS

FF600 Kits WITH Occupant Restraints

FITTING ATTACHMENT KIT PART No. INCLUDED IN KIT OCCUPANT RESTRAINT
L-TRACK S-HOOK FF612S-4C FE200855S (2) FE200907S (2) FE200727HA
L-TRACK BUKCLE & TAB FF612-4C FE200855 (2) FE200907 (2) FE200727HA
SLIDE-N-CLICK S-HOOK FF660S-4C-SNC FE200944S-SNC (2) FE200945S-SNC (2) Q8-7580-A (4) FE200727HA
SLIDE-N-CLICK BUCKLE & TAB FF660-4C-SNC FE200944-SNC (2) FE200945-SNC (2) Q8-7580-A (4) FE200727HA

FF600 Kits WITHOUT Occupant Restraints

FITTING ATTACHMENT KIT PART No. INCLUDED IN KIT
L-TRACK S-HOOK FF627S-4C FE200855S (2) FE200907S (2)
L-TRACK BUKCLE & TAB FF627-4C FE200855 (2) FE200907 (2)
SLIDE-N-CLICK S-HOOK FF661S-4C-SNC FE200944S-SNC (2) FE200945S-SNC (2) Q8-7580-A (4)
SLIDE-N-CLICK BUCKLE & TAB FF661-4C-SNC FE200944-SNC (2) FE200945-SNC (2) Q8-7580-A (4)

FF600 OCCUPANT RESTRAINTS

2017-05-10T13:23:52+00:00

FE200868-2 / FE200868-4

, ,

Dual Retractable Integrated Combination Belt

Dual Retractable Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor.

The FE200868-4 offers an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding.

2017-05-10T13:23:53+00:00

FE200599HA

, ,

Non-Retractable Shoulder Belt with Height Adjuster

Length: 72"

Non-Retractable Shoulder Belt attaches to Series L Track on vehicle sidewall and floor, providing increased positioning flexibility for multiple station vehicles. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

2017-05-10T13:23:53+00:00

FE200710HA

, ,

Non-Retractable Fixed-Point Shoulder Belt with Height Adjuster

Length: 72"

Non-Retractable Fixed-Point Shoulder Belt web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Bottom bracket can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

2017-05-10T13:23:53+00:00

FE200865

, ,

Non-Retractable Fixed-Point Shoulder Belt with Quick Disconnect

Length: 63"

The Quick Disconnect Shoulder Belt can be mounted to the existing original equipment shoulder belt anchor bolt. This allows it to be used along with the original equipment shoulder belt. The Quick Disconnect Shoulder Belt can be easily removed, by using the single push-button buckle, allowing a passenger sitting on the flip seat to use the original equipment shoulder belt. When a wheelchair is placed in the same area, the Quick Disconnect Shoulder Belt connects to its short anchor strap by using the single push-button buckle.

2017-05-10T13:23:53+00:00

FE200604 / FE200604L

, ,

Retractable Fixed-Point Shoulder Belt

FE200604 Length: 112"

FE200604L Length: 136"

Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment. Web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit.

2017-05-10T13:23:52+00:00

FE200604HA

, ,

Retractable Fixed-Point Shoulder Belt with Height Adjuster

Length: 136"

Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment. Web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

2015-07-21T17:41:39+00:00

FE200727 / FE200856

, ,

Integrated Combination Belt

Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear wheelchair tie-down assemblies. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

The FE200856 is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.

2015-07-21T17:41:57+00:00

FE200727HA / FE200856HA

, ,

Integrated Combination Belt with Height Adjuster

Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear tie-down assemblies. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

The FE200856HA is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.

FF600 ACCESSORIES

2015-05-14T14:36:46+00:00

FE200777

Series L Connector Assembly Kit

This kit converts FF600 Retractor Series wheelchair tie-down retractor assemblies to a Series L Track application.

Want to Learn More About FF600 Retractors?

We’re always here to help! Contact us today for questions about our products, training or support.

CONTACT CUSTOMER SERVICE