FE500 Manual

Home/Products/FE500 Manual
FE500 Manual 2017-05-10T13:23:45+00:00
FE500 Manual Series Retractors

FE500
Manual Series Belts

An economical solution, relied upon for over 20 years.

The FE500 offers maximum versatility and a quick, simple operation. As our most economical solution, the easy-to-use tie-down is available in Cam, Ratchet and Overcenter Buckle assemblies and offers snap hook and D-ring or S-hook attachment styles. The 1” wide strap provides easy attachment to a variety of wheelchair designs allowing the webbing to conform to the structural frame of the wheelchair, minimizing scratches and dents.

FE500 Features

The Snap Hook & D-ring configuration provides an easy attachment point for the snap hook on an integrated occupant restraint system.
S-hook attachment allows for easy, one-handed wheelchair securement.
Overcenter Buckle tie-downs can be used in the front or rear securement points of the wheelchair. They are quick and easy to operate and are a popular choice. With Ratchet Buckle tie-downs, the Parallel Lap Belt attaches directly to the floor track and provides an occupant restraint system that secures the
passenger separately and independently from the wheelchair securement system.
1 inch wide tie-down provides easy attachment to a variety of wheelchair designs allowing the webbing to conform to the structural frame of the wheelchair, minimizing scratches and dents.

FE500 Manual Series Belts

Standards Compliance

FE500 retractors, when properly used with a complete Sure-Lok System (comprised of wheelchair tie-down, a complete occupant restraint system, including lap and shoulder belt), track and anchorages are designed to meet the following requirements where applicable:

  • 30mph/20g Impact Test Criteria per SAE J2249
  • 30mph/20g Impact Test Criteria per Canadian Z605 Standard
  • 30mph/20g Impact Test Criteria per National Standards for School Buses
  • 49 CFR Part 38 Americans with Disabilities Act (ADA)
  • 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection
  • FMVSS 302 Flammability Test
  • Certificates of Conformance available upon request

WARNINGS:

Always use two of the same, identical style buckle tie-downs for attachment to the front securement points of the wheelchair and two of the same, identical style buckle tie-downs for attachment to the rear securement points. Mixing types of tie-downs may not provide equal tension and could result in the wheelchair not being properly secured.

Always use Ratchet or Overcenter Buckle tie-downs for attachment to the rear securement points of the wheelchair. Never use Cam Buckle tie-downs for attachment to the rear securement points of the wheelchair as they will not meet system performance requirements.

For more information: Selecting Your System.

MEDIA

Downloads

FE500 Catalog Section
FE500 Operation Decal
FE500 Maintenance Decal

Photos

KITS

FE500 Kits WITH Occupant Restraints

FITTING ATTACHMENT KIT PART No. INCLUDED IN KIT OCCUPANT RESTRAINT
L-TRACK SNAP HOOK & D-RING FE576 FE200602 (2) FE200603 (2) FE200595 (1) FE200599 (1)
L-TRACK S-HOOK FE514S-1 FE200602RS (1) FE200602LS (1) FE200603RS (1) FE200603LS (1) Q5-7571-A (4) FE200595 (1) FE200710 (1)

FE500 Kits WITHOUT Occupant Restraints

FITTING ATTACHMENT KIT PART No. INCLUDED IN KIT
L-TRACK SNAP HOOK & D-RING FE514 FE200602 (2) FE200603 (2)
L-TRACK S-HOOK FE514S FE200602RS (1) FE200602LS (1) FE200603RS (1) FE200603LS (1)
L-TRACK SNAP HOOK & D-RING FE517 FE200603 (4)
L-TRACK S-HOOK FE517S FE200603RS (2) FE200603LS (2)
L-TRACK SNAP HOOK & D-RING FE522 FE200602 (2) FE200783 (2)
L-TRACK S-HOOK FE522S FE200602RS (1) FE200602LS (1) FE200783RS (1) FE200783LS (1)
L-TRACK SNAP HOOK & D-RING FE523 FE200783 (4)
L-TRACK S-HOOK FE523S FE200783RS (2) FE200783LS (2)

FE500 OCCUPANT RESTRAINTS

2017-05-10T13:23:52+00:00

FE200868-2 / FE200868-4

, ,

Dual Retractable Integrated Combination Belt

Dual Retractable Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor.

The FE200868-4 offers an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding.

2017-05-10T13:23:53+00:00

FE200599HA

, ,

Non-Retractable Shoulder Belt with Height Adjuster

Length: 72"

Non-Retractable Shoulder Belt attaches to Series L Track on vehicle sidewall and floor, providing increased positioning flexibility for multiple station vehicles. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

2017-05-10T13:23:53+00:00

FE200710HA

, ,

Non-Retractable Fixed-Point Shoulder Belt with Height Adjuster

Length: 72"

Non-Retractable Fixed-Point Shoulder Belt web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Bottom bracket can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

2017-05-10T13:23:53+00:00

FE200865

, ,

Non-Retractable Fixed-Point Shoulder Belt with Quick Disconnect

Length: 63"

The Quick Disconnect Shoulder Belt can be mounted to the existing original equipment shoulder belt anchor bolt. This allows it to be used along with the original equipment shoulder belt. The Quick Disconnect Shoulder Belt can be easily removed, by using the single push-button buckle, allowing a passenger sitting on the flip seat to use the original equipment shoulder belt. When a wheelchair is placed in the same area, the Quick Disconnect Shoulder Belt connects to its short anchor strap by using the single push-button buckle.

2017-05-10T13:23:53+00:00

FE200604 / FE200604L

, ,

Retractable Fixed-Point Shoulder Belt

FE200604 Length: 112"

FE200604L Length: 136"

Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment. Web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit.

2017-05-10T13:23:52+00:00

FE200604HA

, ,

Retractable Fixed-Point Shoulder Belt with Height Adjuster

Length: 136"

Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment. Web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to the vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

2015-07-21T17:41:39+00:00

FE200727 / FE200856

, ,

Integrated Combination Belt

Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear wheelchair tie-down assemblies. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

The FE200856 is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.

2015-07-21T17:41:57+00:00

FE200727HA / FE200856HA

, ,

Integrated Combination Belt with Height Adjuster

Integrated Combination Belt with snap hooks to attach lap belt to D-rings on rear tie-down assemblies. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use.

The FE200856HA is designed to allow the retractor to be installed on a sidewall rail, which is typically mounted 10” above the vehicle floor.

FE500 ACCESSORIES

Want to Learn More About FE500 Manual Retractors?

We’re always here to help! Contact us today for questions about our products, training or support.

CONTACT CUSTOMER SERVICE